Image Access raises the bar again. The WideTEK 48C-600 scans at 10"/s (254mm/s) even at 300dpi color which is three times faster than any other CIS scanner. It even outperforms the most expensive CCD scanners by a factor of two.
The WideTEK 48C-600 comes with a built-in 64bit Linux PC running on an Intel i3 quad core processor and has more than three times the processing power compared to it's predecessor.
The internal image memory has been tripled from 2GB to 6GB which boosts the maximum scan length at 300dpi color to 50 feet or 16m. Crop & deskew performed on such a long document still only takes about 45 seconds.
Unpack, assemble floorstand, power up, assign an IP address and scan to network resources, wireless to iPADs and Androids or simply to a USB drive – all in less than 1 hour. Compare this to the results from any other scanner vendor.
The total cost of ownership is three times less than with most competitors. The Extended Warranty Coverage is the best program in the industry; it even includes glass, transport and pressure drums.
Functions, features and options available on the WideTEK 48C-300 wide format CIS scanner.
The WideTEK 48C wide format 48 inch CIS scanner is a valuable production device for the following markets and applications. This list is neither complete nor exclusive, there are more markets and applications than listed and it should be taken only as a general guideline. If you have a specific application that is not listed here, please check with your sales representative.
This presentation gives you a detailed overview and comparison of our WideTEK wide format CCD and CIS scanners as well as of our WideTEK flatbed CCD scanners from a technical perspective as well as from a market and applications perspective. Benefits and advantages of the WideTEK models are clearly presented so that you can make an educated decision on which wide format scanner suits your application and requirements.
If you do not have Microsoft PowerPoint, you can download a PowerPoint Player here free of charge. After downloading the player, simply click on the image or link below to start the presentation.
If you do have the capability to start a PowerPoint presentation, just click on the image below.
Image Access holds the copyright on all images shown below.
To get the best possible results with your scanner and to fully understand how to operate it, you should always have the most up to date version of the manuals, instructions and other product documentation. The printed version might be outdated already and you can check here to see that your product documentation is complete and up to date.
This section provides you with the technical specifications and data associated with the WideTEK® 48C CIS based wide format scanner. Speed, scan size, power consumption and environmental data can be found as well as shipping dimensions and weight. These documents are the most detailed summary of the technical specifications.
|Maximum Document Size
|1270 mm (50 inch) width.
More than 65m (200ft) max. scan length.
|Maximum Scan Width
|max. 1220 mm (48 inch)
|Autoformat Size Recognition
|yes, crop & deskew
|DIN A5 – DIN A0 Landscape
|Legal, US E
|max. 2.5 mm (0.1 in.)
|1200 x 1200 dpi (optional 9600 x 9600 dpi interpoliert)
|1200 x 600 dpi
|42 x 42 µm
|Face up, Front entry, Front or rear exit
|Scan Speed Color
|200 dpi – 22.9 m/min (15 inch/s)
300 dpi – 15 m/min (10 inch/s)
600 dpi – 3.8 m/min (2.5 inch/s)
1200 dpi – 1.9 m/min (1.2 inch/s)
|Scan Speed BW
|200 dpi – 22.9 m/min (15 inch/s)
300 dpi – 22.9 m/min (15 inch/s)
600 dpi – 7.6 m/min (5 inch/s)
1200 dpi – 3.8 m/min (2.5 inch/s)
|36 bit color, 12 bit grayscale
|24 bit color, 8 bit grayscale, bitonal, enhanced halftone
|PDF, PDF/A, JPEG, PNM, TIFF uncompressed,
TIFF G4 (CCITT), Multipage PDF, TIFF
|Embedded for sRGB, Adobe RGB and native. Individual profiling via web based Scan2ICC subscription
|± 0.08% across 48 inch scanning width
|± 0.08% with new transport rollers
|64 bit Linux, Intel i3, quad core processor,
8 Gigabyte RAM, 320GB HDD for extra large jobs
|1 GBit Fast Ethernet with TCP/IP based Scan2Net(R) interface
|4x CIS modules, 29,852 pixels, encapsulated and dust-proof
|Approx. 1350 LEDs on both sides, no shadows or wrinkles visible
|195 x 1430 x 410 mm (7.7 x 56.3 x 16.1 inch)
(H x W x D)
|36 kg (80 lbs.)
|100-240 V AC, 47 – 63 Hz (external power supply,
complies with ECO standard CEC level V)
|0.5 W (Sleep) / 4.8 W (Standby) /
55 W (Scanning)
|5 to 40 °C, 40 to 105 °F
|20 to 80 % (non-condensing)
|< 35 dB(A) (Scanning) / < 25 dB(A) (Standby)
Image Access scanners are environmentally friendly, comply to the highest security standards and do not interfere with other devices. We have also made sure that no harmful radiation in the form of electromagnetic emission and UV or infrared light exists. Because these kinds of scanners are heavy production machines with inherent risks to the operator, no one should operate a scanner from a vendor who cannot provide at least an IEC/UL 60950 safety report.
Image Access scanners conform to the many national and international standards which are listed below. Our scanners have been tested and certified by independent laboratories and we can also provide test reports of each standard on paper upon request.
The cETLus Listing Mark is used for products going into the Canadian (shown by the "c" in the mark) and US market (shown by the "us" in the mark). Products with the cETLus mark have been examinated and successfully passed tests according the requirements for device safety. The standards for IT-equipment are UL 60950-1 for the US market and CAN/CSA C22.2 No. 60950-1 for the Canadian market.
The ETL-EU Listing Mark is used for products going into the European market (shown by the "EU" in the mark).Products with the ETL-EU mark have been examined and successfully passed tests according the requirements for device safety. The standards for IT equipment are IEC 60950-1 and EN 60950-1, or the new standards (from 2014) IEC 62368-1 and EN 62368.
The China Compulsory Certificate (CCC mark) is a compulsory safety mark for a wide range of products imported and sold in the Chinese market. It became effective on August 1, 2003, when China became a member of the WTO (World Trade Organisation). The CCC mark is required for both Chinese manufactured and foreign imported merchandise. The CCC certificate must be renewed annually as part of a follow-up certification which includes a factory audit.
BIS is the acronym for Bureau of Indian Standards.Relevant safety standards for India are:
The BIS mark is a requirement for manufacturer who intend to export their products to the Indian market. Tests executed by accredited laboratories ensure that the tested device fulfil all safety relevant requirements of the above named standards.
This device complies with Part 15, Class A of the FCC47 Rules.Operation of this product is subject to the following two conditions:
DE 15679937 WEEE is the European Community directive 2002/96/EC on waste electrical and electronic equipment which, together with the RoHS Directive 2002/95/EC, became European Law in February 2003, setting collection, recycling and recovery targets for all types of electrical goods. (Waste Electrical and Electronic Equipment).
The devices correspond to the requirements of the RoHS-guidelines (Restriction of the use of certain Hazardous Substances in Electrical and Electronic Equipment).
One of the distinguishing features of our CIS based wide format scanner WideTEK 48C and all of our scanners is the unique Scan2Net technology. A part of Scan2Net is the ability to update the scanners firmware in a few seconds via the network interface. The firmware updates can be obtained through our customer service portal at any time and the portal will also always check, which firmware is suitable for your specific scanner.
In addition to service and support options available 24/7, software and firmware updates for the CIS based wide format scanner WideTEK 48C can be found and downloaded from our Customer Service Portal. In order to get the maximum benefit from the features and options of the Customer Service Portal, please log in with your personal account data. If you do not already have a personal account, you can request one here. Your account data and user login will be sent to your email account immediately. In the meantime, you can log in as a guest (Login: Guest, Password: Guest) to get a first impression. Please keep in mind that the guest account only gives you limited access to the features of the Customer Service Portal.
Download a tool to calculate the productivity of competing CIS wide format scanners in documents scanned per hour, based on manufacturer's published specifications.Productivity Calculator – Excel 2010 and higher
Download a tool to calculate the total cost of ownership of competing wide format scanners, based on manufacturer's published information.TCO Calculator – Excel 2010 and higher